Guides
Practical guides to measuring and tuning sound systems, from setting up the rig and reading a transfer function to aligning subwoofers, EQ, room acoustics and show levels, and honest comparisons with other measurement software.
Updated 17 November 2026
Using PA Trace? These guides explain the method, with notes on where each tool sits in the app. The complete user manual, with every window, setting and shortcut, is the PDF in the Documentation folder of your download. Questions: support@patrace.app.
Getting started
- How to set up a dual-channel measurement rig Microphone, interface, where to take the reference, and the levels that make a measurement trustworthy.
- Measurement microphone calibration SPL calibration with a 94 dB calibrator, mic correction files, and when each one matters.
- Transfer function measurement, explained Magnitude, phase, coherence and the impulse response: what they are and how to read them.
Reading a measurement
- Coherence: how far to trust a measurement What the coherence trace means, what each pattern of low coherence points to, and how to raise it.
- FFT size, time windows and multi-time-window analysis Why one FFT size cannot serve the whole audio band, and how a multi-time window solves it.
System tuning
- How to tune a PA system, step by step The order of work, from verifying the system to EQ and documentation.
- How to check loudspeaker polarity Read polarity in the impulse response and the phase, and why subs and crossovers fool the quick check.
- How to align subs and tops Delay and polarity at the crossover, measured and checked across the audience.
- How to time delay speakers, fills and delay towers Measure the arrival of each source where they overlap, delay the earlier one, and check the comb filter is gone.
- How to EQ a PA system Average several seats, compare with a target curve, and set parametric filters only where the seats agree.
Room, spectrum and level
- How to use an RTA in live sound What a real-time analyzer is good for at a gig, from ringing out feedback to checking a mix, and what it cannot do.
- How to measure a room: impulse response, RT60 and STI Read the impulse response, measure reverberation time, clarity and speech intelligibility, and find the surface behind a reflection.
- SPL monitoring at live shows dBA or dBC, Fast, Slow or Leq, and how to log a show so the numbers hold up when someone asks.
Reference
- Measurement troubleshooting No signal, low coherence, a phase that will not settle, a delay that jumps: causes and checks, quickest first.
- Sound system measurement glossary Short definitions of the terms used in system measurement and tuning, from acoustic center to Wind Lock.
Comparisons
- PA Trace vs Smaart Price, platforms, tools, and a side-by-side accuracy test.
- PA Trace, Open Sound Meter and REW When a free program is enough, and what PA Trace adds.