PA Trace vs Smaart. The same measurement, under an eighth of the price.
Smaart is the industry standard for dual-channel FFT. PA Trace measures the same way, adds tools that do the arithmetic for you, and was checked against Smaart on the same signal. Below: price, features, a measured accuracy test, and when Smaart is still the better choice.
- Computers2, Windows or Mac
- PlatformsWindows 10/11, macOS 11+
- Refund14 days, no questions
- Computers2 (perpetual)
- PlatformsWindows 10, macOS 10.14+
- Licenseper Rational Acoustics' terms
Smaart prices and requirements as listed on rationalacoustics.com in November 2026.
less than a Smaart Suite perpetual license
magnitude error on a known EQ curve, against 0.15 dB
read on a −12.8 dB notch, where Smaart read −8.3 dB
activates on Windows or Mac, two computers at a time
At a glance
The measurements you rely on are in both. The difference is price, platforms and the tools around them.
| PA Trace 2.2 | Smaart Suite v9 | |
|---|---|---|
| Price | US$149 one-time | US$1,299 perpetual, or annual |
| Transfer function: magnitude, phase, coherence | ✓Multi-time-window (MTW++) | ✓Multi-time-window |
| RTA and spectrograph | ✓To 1/48 octave | ✓Yes |
| Impulse response and room acoustics | ✓T20, T30, EDT, C50, C80, D50, STI | ✓Yes |
| SPL metering and show logging | ✓Leq, alarms, show report | ✓Yes |
| One license for Windows and Mac | ✓The same code activates either | –See Rational Acoustics' terms |
| Automatic sub and top alignment | ✓Auto Phase, with Verify | –Done by hand |
| Proposed EQ filters to a target | ✓Auto PEQ, up to 16 filters | –Done by hand |
| Control from a phone browser | ✓Venue Wi-Fi or internet | –Not in the same form |
The same signal through both
Both programs captured the same pink noise through a filter whose response is known exactly. We measured how far each trace was from the truth, 20 Hz to 20 kHz.
In heavy uncorrelated noise neither wins: both read about 3 dB high, as theory says they should. Run the software side yourself in PA Trace: Help, Verify Measurement Accuracy.
What PA Trace adds on top
The arithmetic between measuring and deciding, shown with its numbers, so the decision stays yours.

Auto Phase delay and polarity
Tick the subs and the tops; it proposes the alignment, draws the predicted sum and verifies it live.

Phone remote in the browser
Walk the room with the mic and run engines, captures and the delay finder from the phone.

Subwoofer Optimizer before it is built
Ranked sub array layouts with delay and polarity per group, and SPL and rear rejection maps.
When Smaart is the better choice
- Your riders, rental company or team expect Smaart, or you share Smaart files with other engineers.
- You want the program most training courses, books and forum answers are written for.
- You rely on parts of Smaart's ecosystem that PA Trace does not have.
When PA Trace is the better choice
- You want professional dual-channel measurement without a four-figure price.
- You work on both Windows and Mac: one license runs on either.
- You want help with crossover alignment, EQ proposals and sub planning, with the numbers shown.
- You tune alone and want the controls on your phone while you walk the room.
Try it on your next show, risk-free
Buy PA Trace and use it on your next job. If it is not right for you, ask within 14 days and you get the full amount back.
Buy PA Trace, US$149